The right way to use an anchor is probably one of the least
understood areas of boating. If you are new to boating you may be thinking - how
hard can it be? You simply throw the anchor in the water, wait until it hits the
bottom, then tie it off, correct?
Anyone who is experienced with boating has probably seen the types of problems
that type of attitude can cause. Just like everything else in boating, using an
anchor requires the right equipment, careful thought, and a lot of practice.
The starting point is selecting the right ground tackle (the proper term for the
anchor, line, chain, shackles and swivels) for your boat and your style of
boating. There is no single anchor that will do everything perfectly. Each style
has its own unique benefits and drawbacks, and each one performs best under its
given conditions.
The Danforth anchor...
The Danforth anchor is one of the most popular. It is easily identified by its
two long, sharp pivoting flukes and long shank. The Danforth is also a great
choice for small to medium sized boats as well. The anchor is light and easy to
store, digs well into sand and mud, and releases easy when pulled from different
directions.
The flukes on the Danforth anchor pivot so that the shank can be pulled at a
more vertical angle. It's ideal for fishing, which requires quick release and
moving around to different locations. If you fish overnight a lot or travel to
different areas of water you may want to consider a different anchor, which will
hold better in changing conditions.
The plow anchor...
The CQR, or plow anchor, features a single shaped fluke that pivots at the end
of the shank. This design works well on many bottoms. The plow shank pivots from
side to side, while remaining parallel to the fluke. This design also makes
releasing a snap when the anchor is pulled vertically.
The Bruce anchor...
This anchor was originally created for offshore gas and drilling rigs. The more
scaled down version of this anchor is popular with boaters. The anchor holds
fast, yet it will still come loose when pulled vertically.
Always make sure to select an anchor system that matches the length of your
boat, displacement, and the windage. If your looking for strength, elasticity
and durability, you should use only top quality braided nylon anchor line.
It's very important that the size and length of your anchor line is appropriate
for your boat andit's requirements. Small or medium boats should use a section
of galvanized steel chain between the line and the anchor.
If you are new to boating, anchoring is something you should become familiar
with. As you use your boat more, you'll pick up the proper anchoring techniques.
Or, if you prefer, you can always take classes and learn everything you need to
know about using an anchor from a qualified professional.
Back to Boating Home Page
Top Rated Boating Sites
The fastest growing Boating Classifieds site
Celebrate your passion as a water enthusiast.
Overton's : The World's Largest Watersports Dealer
High Quality Inflatable Boats,Canoes and Kayaks
Boating and watersports gear and supplies
Do-It-Yourself Plans To Build A 16'Grand Banks Dory.
How To Maneuver Twin Engine Boats.
Complete Directory Of Boating Links
Visit
our Boating Companion Site
Don't forget to check our
latest ebook.."Everything You Always Wanted To Know About Boating, but never dared to ask .." |
Main Article Library
|
|
|
| Subscibe to our Newsletter Receive the Identity Theft Guide, a never before released comprehensive 39 page resource.. $49.00 value yours FREE for susbcribing |